
Concrete Contractor in Beachwood, OH
Driveways, stamped patios and sidewalks that meet city code, for Beachwood's established neighborhoods. More than 30 years of work in the area.
Concrete Solutions Built for Beachwood
Beachwood is one of the best-kept communities around Cleveland, and the city holds concrete work to a high standard. It has specific rules for apron thickness (usually 6 inches where the driveway meets the street), drainage grading and inspections, and contractors who don't know them often fail inspection.
We've worked in Beachwood for more than 30 years and know its codes and inspection process well. We handle the permits and inspections, and we build to Beachwood's actual standards so the work passes the first time.
Beachwood requires a 6-inch apron where the driveway meets the street, which is stricter than many nearby towns. Every Beachwood apron we pour is 6 inches thick, reinforced and sloped to drain, and we take care of the permit and inspection.
Our Beachwood Concrete Services
Driveway Replacement & Aprons
We take out the old driveway and pour a new one with a 6-inch apron to meet Beachwood code, sloped to drain, reinforced with wire mesh and broom-finished. We handle the permit and inspection.
Custom Stamped Patios
Stamped concrete patios in slate, cobblestone and stone patterns, sealed to protect the color from the sun.
City-Compliant Sidewalk Replacement
If the city has cited your sidewalk, we handle it from start to finish: ADA-compliant slopes, proper drainage and the permit.
Garage Floor Restoration
New garage floors with a smooth hard-trowel finish, a vapor barrier and wire mesh. Good as bare concrete or as a base for epoxy.
Permit Management & Inspection Coordination
We're registered with Beachwood's building department. We file the permit, schedule the inspections and are there for the sign-off, so you don't have to deal with the city yourself. Our work passes the first time because we build it to code.
On every Beachwood job we build the apron to Beachwood's 6" code, handle the permit from application to final inspection, and pour 4,000+ PSI concrete with wire mesh reinforcement. We've worked in Beachwood neighborhoods for more than 30 years, and we're licensed, bonded, and insured in Ohio with a BBB A+ rating. Ready to start your Beachwood project? Beachwood requires city permits and inspections, and we take care of all of it from start to sign-off.
Driveway Replacement & New Concrete in Beachwood, Cuyahoga County
Beachwood is in Cuyahoga County, an established east-side suburb with homes on quiet streets and businesses along I-271. Whether your driveway has cracked and heaved after years of freeze-thaw or you want a brand-new one, we bring more than 30 years of local experience to the job.
We’re based in nearby Chagrin Falls and have poured driveways, aprons and other flatwork all over Beachwood and Cuyahoga County. Our own crew does every job start to finish, with no subcontractors. Every slab goes on a properly compacted base, with 4,000+ PSI reinforced concrete and control joints in the right places.
Soil Conditions & Permit Requirements in Beachwood
The heavy clay in Cuyahoga County swells and shrinks with the seasons. Without a compacted crushed-stone base, it will crack a concrete driveway within a few winters.
The City of Beachwood requires a building permit to replace a driveway, plus right-of-way approval for any change to the apron at the street.
We're based in Chagrin Falls, about 20 minutes from most Beachwood addresses.
Good to Know
Frequently Asked Questions
How much does a new concrete driveway cost in Beachwood?
It depends on the square footage, slab thickness, removal and hauling of the old driveway, the condition of the sub-base, and any drainage or apron work. Instead of quoting a misleading per-foot number, we measure your Beachwood driveway on-site and give you a clear estimate.
Do I need a permit to replace a driveway in Beachwood?
It varies by municipality. In and around Beachwood, apron work near the public road can require a permit or right-of-way sign-off. We’ll let you know what applies to your project and help you handle it.
How long does a driveway replacement take in Beachwood?
Most Beachwood residential driveways are removed and re-poured within two to four working days, depending on size and weather. You can walk on the new surface in 24–48 hours, but we ask you to wait 7 full days before driving on it.
How thick should my Beachwood driveway be?
Four inches over a properly compacted base is standard for cars; heavier vehicles call for 5–6 inches. We assess how you’ll use the driveway at your Beachwood home and pour to the correct thickness.
Will a new concrete driveway hold up to Beachwood winters?
Yes, when it’s built right. A compacted base, a 4,000+ PSI mix, properly spaced control joints, and sealing are what let a Beachwood driveway handle freeze-thaw cycles and de-icing salt for decades.
Concrete Services in Beachwood
Request your free estimate
Tell us about your driveway, patio, garage floor, or walkway. We’ll get back to you within 24 hours with clear pricing and no pressure to commit.
Call (440) 720-1175Prefer to talk? Guy answers Monday–Saturday.